When a hydraulic line lets go on a loader at seven in the morning, the search that follows is always the same: hydraulics store near me. Nitro Industrial runs two counters you can drive to. Concord sits at 8520 Jane St Units 7-9 and Barrie sits at 740 Huronia Rd Unit 7. Walk up with the failed hose or the fitting in your hand, and the counter staff identify it, pull the hose and couplings from stock, crimp the assembly and hand it back on the same visit. Both counters open at 8 a.m., Monday through Friday.
The useful test for any hydraulics store near me is stock and thread knowledge. A counter that has to order your coupling is a counter you will be waiting on tomorrow. The Barrie branch keeps a full SAE 100R series inventory on the shelf along with an on-site Gates crimper, so the assembly gets built while you stand there.
What can a hydraulics store near me finish the same day?
Six jobs the counter covers, most of them finished while you wait. That list is the honest measure of a hydraulics store near me. Nitro lists same-day hose assembly and crimping, hydraulic and pneumatic line repairs, custom lengths and configurations, and pressure testing for safety and compliance among its hose and fitting services, and both branches carry the stock behind them.
- A hydraulic hose assembly built to length. Hose off the reel, couplings crimped on both ends, cut to the length the machine actually needs.
- A fitting or adapter matched to the one you brought. The Barrie counter keeps JIC fittings, ORFS fittings and hydraulic adaptors ready to hand over.
- A hydraulic or pneumatic line repair. Line repairs run in shop, and pneumatic hose and tubing sit on the same shelves.
- A pressure test before the assembly leaves. Pressure testing for safety and compliance is part of the fabrication service.
- Shop supplies off the shelf. Abrasives, power tools, pumps, pressure washers and the consumables a maintenance crew burns through.
- A standing stock arrangement. Just-in-time stocking and kitting, so the parts you go through most are already set aside for you.
Gates hydraulic hose comes off the reel and gets cut to the length the machine needs, which is the same-day assembly work both counters are set up for.
What happens when you walk up to the counter
The sequence is short. You bring the part, the counter works out what it is, stock comes off the shelf, the assembly gets built, and you leave with it. Here are those five steps as the crews run them.
Five steps from the door to the driveway
Step 1
You bring the failed assembly to the counter, in pieces if that is how it came off the machine.
Step 2
The counter identifies the hose and both end connections, working from the printing on the hose and the fittings themselves.
Step 3
Hose comes off the reel and the couplings come out of the bins, both from stock held on site.
Step 4
The hose is cut to length, crimped, and pressure tested before it is handed over.
Step 5
You take the finished assembly with you and get the machine back in service.
Step two is where a hydraulics store near me earns its keep, and it is the reason the part in your hand beats a description over the phone. Hose gets identified from the printing along its cover, and the size gets confirmed from the ferrule stamp or by measuring the outside diameter. Ends get identified by thread, seat and sealing style, so a JIC end and an ORFS end never get confused. Custom lengths and configurations are part of the service too, so an assembly that never had an off-the-shelf equivalent still gets built. If you want the background before you go, our guide to hose fittings and adaptors covers the families you will be asked about.
Where the two counters are, and when they are open
Distance is the whole point of a hydraulics store near me, so here is exactly where both sit. Concord covers Vaughan and the northern GTA from 8520 Jane St Units 7-9, Concord, ON L4K 5A9, on (905) 760-1711. Barrie covers Simcoe County from 740 Huronia Rd Unit 7, Barrie, ON L4N 6C6, on (249) 315-4673. Concord is a retail storefront and a full service centre in one, where hydraulic systems, pressure washing units and pneumatic controls are built, repaired and customized under the same roof.
| Counter | Address | Phone | Hours |
|---|
| Barrie | 740 Huronia Rd Unit 7, Barrie, ON L4N 6C6 | (249) 315-4673 | Monday to Friday, 8 a.m. to 5:30 p.m. Closed Saturday and Sunday. |
| Concord | 8520 Jane St Units 7-9, Concord, ON L4K 5A9 | (905) 760-1711 | Monday to Friday, 8 a.m. to 5:30 p.m. Saturday, 9 a.m. to 1 p.m. Closed Sunday. |
Saturday is the difference worth noting. Concord is open Saturday morning until one o’clock. Barrie is closed on Saturdays, so a Saturday breakdown north of the city means a Concord run before one o’clock, or a Monday morning start. Both sites are closed Sunday.
Take the hose off safely before you drive over
Depressurize the system before you pull a damaged line. The Canadian Centre for Occupational Health and Safety warns that hydraulic oil can still be under pressure even when the system is shut down, and that improperly maintained or adjusted hydraulic parts can cause serious injury.
Writing about hydraulic lifts, CCOHS lists the order to follow before servicing work starts. Lower hydraulically powered attachments to the ground or support them on suitable metal stands or blocks. Shut off the engine that powers the hydraulic pump. Move the hydraulic lever back and forth a few times to release residual pressure. Lock out levers and power switches so the system cannot be started while someone is working on it. Then let the system cool down.
One warning deserves its own line. CCOHS says to check for leaks by passing a piece of cardboard or wood over the suspected area, and warns against using your hands, because hydraulic fluid can pierce the skin and, in the agency’s words, small injuries can have serious consequences. Get medical help immediately. Fluid escaping through a pinhole leak is hard to see and can puncture skin at pressure, so have a doctor treat any hydraulic fluid skin puncture right away. If the line is still live and you would rather it came off by someone with the right gear, Nitro also runs mobile and in-shop hose repair.
What to bring so you leave with the right part
Five things turn a counter visit into one stop.
- The failed assembly itself, even in pieces. It carries the printing on the cover, the size and both end styles.
- A photo of how it routed on the machine, so the new one gets the same bend and the same clocking.
- The machine make and model. It helps the counter picture the application, and it saves a second conversation.
- The length you want. The old assembly is the easiest reference for it.
- Everything else on your list. Abrasives, gloves, a pump part. One trip covers all of it.
That is what a hydraulics store near me is worth on a bad morning: one drive, one counter, one invoice. If you only need the hose itself, hose built while you wait covers the same ground in more detail.
Who the counters are built for
The Barrie counter was set up for aggregates and quarries, construction and excavation companies, haulage and trucking fleets, municipal works departments, vac truck operators, mobile equipment operators and industrial maintenance teams. Concord serves the same work across Vaughan and the GTA, with the service centre behind it, where hydraulic systems are built, repaired and customized. For a quarry or a vac truck fleet, the value of a hydraulics store near me is measured in drive time.
The hose side of a hydraulics store near me carries real weight behind it. Nitro is Gates’ largest independent distributor of industrial and hydraulic hoses in Canada, and Ontario’s only independent CAT hose supplier outside of Toromont. Jeremy Sokoloff leads the Barrie operation. The company was founded by David Sokoloff and Barry Sokoloff, and runs on three generations of hands-on experience in industrial supply. Vaughan customers can also read up on hose crimping in Vaughan before they come in.
Questions people ask before they drive over
Is there a hydraulics store near me I can walk into?
If you are in Simcoe County or the northern GTA, yes. Nitro Industrial runs a walk-in counter in Barrie at 740 Huronia Rd Unit 7 and another in Concord at 8520 Jane St Units 7-9. The Barrie page puts it plainly: walk in with a damaged hose and leave with a replacement built to spec.
What can I get at the counter the same day?
Hose assemblies crimped to length, fittings and adapters matched to the one you bring in, hydraulic and pneumatic line repairs, and a pressure test on the finished assembly. Shop consumables, abrasives, power tools, pumps and pressure washers come off the same shelves.
What are the counter hours?
Barrie is open Monday to Friday, 8 a.m. to 5:30 p.m., and closed on weekends. Concord is open Monday to Friday, 8 a.m. to 5:30 p.m., plus Saturday from 9 a.m. to 1 p.m. Both are closed Sunday.
Where can I buy hydraulic hose and fittings in Ontario?
From either counter, or shipped. Nitro stocks hydraulic hose in standard and abrasion resistant covers, pneumatic hose and tubing, steel, brass and stainless fittings and adapters, quick-connect couplings, DIN and GAZ fittings, metric and imperial compression fittings, and high-pressure steel fittings. Stocked inventory and fast shipping cover the sites where no hydraulics store near me exists at all.
Can you build a hose if I only have the old one?
Yes, and that is the normal case. The old assembly carries everything needed: the working pressure rating from the printing on the cover, the size from the ferrule stamp or an outside diameter measurement, and both end connections from the fittings themselves. Bring it in even when it is split, burst or covered in oil.
Do you repair lines on site?
Mobile and in-shop repairs are both available, so a damaged hose can be fixed at your facility or at ours. For anything past a hose, the Concord service centre builds, repairs and customizes hydraulic systems.
If a machine is down right now, the useful version of a hydraulics store near me is a phone call. Barrie is on (249) 315-4673 and Concord is on (905) 760-1711. Send the machine and the hose details through the contact page and the counter can have the parts pulled before you arrive.
